The Workbench ‘Done for the day’ Checklist

Don’t forget to:

• Protect the lightbulbs by unscrewing them and putting them back into the IO tacklebox.
• Detach all the wires and put the loose ones back into the IO.
• Detach the battery component from the WorkBench. Turn the battery switch to “OFF.”
• Detach the socket components from the WorkBench.
• Detach the switch component from the WorkBench.
• Make sure your multimeter is turned OFF.
• Put the multimeter and the other components back into the IO and close it up.
• Snap the WorkBench onto the top of the IO.

You are done!